Dry-Lining Screws

Metalfix Self-Drilling Screws Wafer Head 4.2 x 13mm

Metalfix Self-Drilling Screws Wafer Head - 4.2 x 13mm - Bag of 30

Low Pan Screw PH2 S/DRILL EXT_x000D_

A light duty metal to metal screw with a reduced pan to give a flush finish. Silver organic plated to withstand over 500 hours salt spray test.

LowPancake Scrw PH2 SDRILL EXT_x000D_

A medium duty metal to metal screw with a large flat surface under the head, making it ideal for fixing thinner sheet material when a flush finish is required. Silver organic plated to withstand over 500 hours salt spray test.

LowPancake Scrw PH2 SDRILL EXT_x000D_

A medium duty metal to metal screw with a large flat surface under the head, making it ideal for fixing thinner sheet material when a flush finish is required. Silver organic plated to withstand over 500 hours salt spray test.

Low Wafer Screw PH2 SDRILL EXT_x000D_

A light duty metal to metal screw with a large flat surface under the head, making it ideal for fixing thinner sheet material when a flush finish is required. Silver organic plated to withstand over 500 hours salt spray test.

Cement Board Screw TWINCUT EXT_x000D_

Specifically designed for fixing cement board to timber and thin sheet metal (max. 0.6mm). Self countersinking head for a secure and flush finish. Twin-cut point with a hi-low thread. Exterior grade coating for superior corrosion resistance in damp or corrosive environments, when compared to standard fasteners.

Cement Board Screw TWINCUT EXT_x000D_

Specifically designed for fixing cement board to timber and thin sheet metal (max. 0.6mm). Self countersinking head for a secure and flush finish. Twin-cut point with a hi-low thread. Exterior grade coating for superior corrosion resistance in damp or corrosive environments, when compared to standard fasteners.

Cement Board Screw S/DRILL EXT_x000D_

Specifically designed for fixing cement board steel dry-lining frames (max. 3.0mm). Self countersinking head for a secure and flush finish. Self-drilling point with a self-tapping thread. Exterior grade coating for superior corrosion resistance in damp or corrosive environments, when compared to standard fasteners.

Cement Board Screw S/DRILL EXT_x000D_

Specifically designed for fixing cement board steel dry-lining frames (max. 3.0mm). Self countersinking head for a secure and flush finish. Self-drilling point with a self-tapping thread. Exterior grade coating for superior corrosion resistance in damp or corrosive environments, when compared to standard fasteners.

Wafer Screw PH2 SHARP Zinc_x000D_

Used when constructing drywall track and ceiling track systems to stitch the track together (Max. 0.6mm) without the need to pre-drill a hole.

Wafer Screw PH2 S/DRILL Zinc_x000D_

Used when constructing drywall track and ceiling track systems to stitch the track together (Max. 3.0mm) without the need to pre-drill a hole.

Pan Screw PH2 S/DRILL No3 Zinc_x000D_

A light duty metal to metal screw with a phillips recess used for interior applications.

Pan Screw PH2 S/DRILL No3 Zinc_x000D_

A light duty metal to metal screw with a phillips recess used for interior applications.

Pan Screw SQ2 S/DRILL No3 Zinc_x000D_

A light duty metal to metal screw with a square recess used for interior applications.

Pan Screw PH2 S/DRILL No3 Zinc_x000D_

A light duty metal to metal screw with a phillips recess used for interior applications.

Pan Screw PH2 S/DRILL No3 Zinc_x000D_

A light duty metal to metal screw with a phillips recess used for interior applications.

Drywall Screw PH2 Fine Zinc_x000D_

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded.

Drywall Screw PH2 Coarse ZYP_x000D_

Used to secure plasterboard to timber stud work. NOTE: Partially threaded.

Drywall Screw SELF DRILL Zinc_x000D_

Self-drilling point to aid fixing plasterboard to wall/ceiling track systems with a max. of 4.0mm thickness. NOTE: Partially threaded.