Skip to Content

Builders Metalwork

Masonry Joist Hangers Galvanised - 47 x 175
Single Piece Masonry Hanger The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from pre-galvanised steel to give a high level of corrosion resistance.
£ 21.25 21.25 GBP
Masonry Joist Hangers A2 Stainless Steel - 47 x 175
Welded Masonry Hanger A2 SS The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
£ 25.20 25.2 GBP
Masonry Joist Hangers Galvanised - 47 x 200
Single Piece Masonry Hanger The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from pre-galvanised steel to give a high level of corrosion resistance.
£ 26.80 26.8 GBP
Masonry Joist Hangers A2 Stainless Steel - 47 x 200
Welded Masonry Hanger A2 SS The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
£ 30.60 30.6 GBP
Masonry Joist Hangers Galvanised - 47 x 225
Single Piece Masonry Hanger The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from pre-galvanised steel to give a high level of corrosion resistance.
£ 123.40 123.4 GBP
Masonry Joist Hangers A2 Stainless Steel - 47 x 225
Welded Masonry Hanger A2 SS The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
£ 251.00 251.0 GBP
Mini Multi-Functional Hangers Galvanised - 47 x 240
Multi Functional Hanger - Mini TIMco’s Multi-Functional Hangers are designed for applications where additional strength is required or where access to the top of the timber or steel is not available. Designed for use with different fixings to give greater flexibility and improved performance. Manufactured from Pre-Galvanised Steel to give a high level of corrosion resistance. NOTE: Overall length refers to the length of the hanger when laid flat.
£ 37.00 37.0 GBP
Multi-Functional Hangers Galvanised - 47 x 346
Multi Functional Hanger TIMco’s Multi-Functional Hangers are designed for applications where additional strength is required or where access to the top of the timber or steel is not available. Designed for use with different fixings to give greater flexibility and improved performance. Manufactured from pre-galvanised steel to give a high level of corrosion resistance. NOTE: Total length refers to the length of the hanger when laid flat.
£ 344.43 344.43 GBP
Multi-Functional Hangers Galvanised - 47 x 404
Multi Functional Hanger TIMco’s Multi-Functional Hangers are designed for applications where additional strength is required or where access to the top of the timber or steel is not available. Designed for use with different fixings to give greater flexibility and improved performance. Manufactured from pre-galvanised steel to give a high level of corrosion resistance. NOTE: Total length refers to the length of the hanger when laid flat.
£ 262.08 262.08 GBP
Waterbars Galvanised - 28mm x 1m x 4mm
Waterbar A steel bar for fitting into door sills for weather protection. Manufactured from Galvanised Steel to give a high level of corrosion resistance.
£ 21.70 21.7 GBP
Waterbars Galvanised - 28mm x 2m x 4mm
Waterbar A steel bar for fitting into door sills for weather protection. Manufactured from Galvanised Steel to give a high level of corrosion resistance.
£ 57.10 57.1 GBP
Universal Framing Anchors Galvanised - 124 x 40 x 40
Universal Framing Anchor For strong nailed joints and economical secondary connectors in timber framing. Framing anchors are an effective, versatile and economical method of providing strong, mechanical joints.
£ 37.50 37.5 GBP
Window Board Ties Galvanised - 147 x 12
Window Board Tie A simple solution to tie window boards to masonry. Manufactured from Galvanised Steel to give a high level of corrosion resistance.
£ 130.50 130.5 GBP
Restraint Straps Heavy Duty Bent Galvanised - 900/100
HD Bent Restraint Strap Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standards for horizontal restraint. Manufactured from galvanised steel to give a high level of corrosion resistance.
£ 57.00 57.0 GBP
Restraint Straps Heavy Duty Bent A2 Stainless Steel - 900/100
HD Bent Restraint Strap A2 SS Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standards for horizontal restraint. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
£ 251.20 251.2 GBP
Restraint Straps Light Duty Bent Galvanised - 900/100
LD Bent Restraint Strap Generally used for vertical restraint such as holding down a wall plate. Manufactured from Galvanised Steel to give a high level of corrosion resistance.
£ 31.40 31.4 GBP
Light Duty Restraint Straps Bent A2 Stainless Steel - 900/100
LD Bent Restraint Strap A2 SS Generally used for vertical restraint such as holding down a wall plate. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
£ 173.70 173.7 GBP
Restraint Straps Heavy Duty Twisted Galvanised - 900/100
HD Twisted Restraint Strap Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standards for horizontal restraint. Manufactured from Galvanised Steel to give a high level of corrosion resistance.
£ 77.80 77.8 GBP
Restraint Straps Light Duty Twisted Galvanised - 900/100
LD Twisted Restraint Strap Generally used for vertical restraint such as holding down a wall plate. Manufactured from Galvanised Steel to give a high level of corrosion resistance.
£ 46.10 46.1 GBP
Masonry Joist Hangers Galvanised - 100 x 150
Welded Masonry Hanger The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from pre-galvanised steel to give a high level of corrosion resistance.
£ 41.22 41.22 GBP